Xicato is a leading manufacturer of intelligent LED modules for downlight and spotlight luminaires integrating electronics, software and connectivity.
Light Sources
- Available in LES 6mm to 9.8mm
- Light output from 750lm to 1550lm
- CCT Range from 2700K to 4000Kv
- CRI: 80, 90, 95, Vibrant 95
- Color Consistency: Xicato 1x2 SDCM
- Light output from 700lm to 3000lm
- CCT range from 2700K to 4000K
- 19mm and 9mm LES options
- DALI, 1-10V and Bluetooth wireless options
- Integrated 48VDC driver electronics
- Light output 1300lm to 5000lm @ 19mm LES
- Light output 700lm to 2000lm @ 9mm LES
- CCT range from 2700K to 4000K
- Zhaga compatible form factor
- Very tight color consistency, within 1 x 2 MacAdam Ellipses
- Over 135+ lumens per watt at operating conditions
- Very tight color consistency, within 1 x 2 MacAdam Ellipses
- CCT range from 2700K to 4000K
- Light output from 700lm to 5000lm
- Available in LES from 9mm to 19mm
- Color Rendering: CRI Ra: 98; CRI R9: 95 // TM-30 Rf: 95; Rg 102 (all metrics are typical)
- Flux Consistency: 720 lumens per meter ±10% across continuous 5m length
- Color Consistency: 1×2 SDCM across continuous 5m length
- Lumen Maintenance: L70/B0/F0 @ 50k hours
Smart Controls
- Deep dimming drivers IEEE 1789-compliant to 0.1%
- Bluetooth and/or wired control of most LED sources
- XID01-25 programmable current 350mA to 700mA (up to 28W)
- XID01-50 programmable current 700mA to 1400mA (up to 56W)
- Accept either 24V or 48V DC input
- Wireless nodes that transmit sensor data over a Bluetooth network
- Motion, ambient light, temperature, and relative humidity
- Communicates directly with Bluetooth nodes, including lights (XIM, XID, partner products) and gateway (XIG).
- Powered by any 6V to 56V DC power source or CR2450 3V coin cell battery
- Wired or wireless IP access to a wireless Bluetooth network
- Monitor, control, and configure devices using any internet browser or third party control or building management system.
- Control individual lights or lighting groups and pre-programmed scenes
- Monitor temperature, intensity, power consumption, input voltage, and total operating hours
- Small, dedicated computer to program and brand lighting nodes
- Add company name, luminaire model number, and serial number to data reporting
- Set the maximum lumen output of a lighting module to between 50-100% of its peak intensity
- Preconfigure settings for the convenience of installers, commissioners, and end users
- Enables lighting control devices that can participate as wireless nodes in a Xicato Bluetooth® mesh network
- High radio transmission power and excellent receive sensitivity for reliable point-to-point and mesh communication
- Can be programmed for either 1-channel or 4-channel PWM
- Platform will support UART and/or I2C communication for even greater channel and feature capacity
- Eliminate control wires! Enable conversion of standard 0-10V dimming switches or low voltage contact switches into programmable Bluetooth lighting controllers.
- XSW-DIM allows any standard 0-10V on/off/dim switch to issue Bluetooth dimming commands to individual lights, groups, or networks.
- XSW-LVC allows wireless on/off/dim or scene commands to lights, groups, or networks.
- FCC, CE/RED and RCM certified and is UL Listed
- DC powered, 12-50V, UL Class2, SELV Class III
- Evaluation/Demo Kits
- XIM Gen4
- XID
- XGC
- Color
Accessories
- Adapter, XIM/XTM Twist Lock Adapter Ring, 3 holes
- Holder, 45mm Poke-In XCA Holder